Ⅰ. Use and characteristics
Stainless steel vacuum reactor is with double Stainless steel design, the inner layer placed reaction solvent can do the mixing reaction, the inter layer can be added with the different hot and cold sources (frozen liquid, hot water or hot oil) to do loop heating or cooling reaction. Under the conditions of constant temperature setting, the mixing reaction can be carried on inside the sealed Stainless steel reactor according to requirements under the conditions of atmospheric pressure or negative pressure, and the reflux and distillation of the reaction solution can also be done, it is the ideal pilot and production equipment of modern fine chemical plant, biological pharmacy and synthesis of new materials.
The double Stainless steel reactor of the company is the essence of the domestic similar products, with recommendations and experiences of all use customers, it has already been formed 1L, 2L, 3L, 5L, 10L, 20L, 30L, 50L, 100L and 150L series, the product design follows the efficient, practical and economic principles, all are for the users.
1. Using mechanical seal, it can maintain high vacuum degree.
2. Use efficient condenser to ensure high recovery rate.
3. The Stainless steel inter layer interface is added with hot oil, through the loop, it can do reaction under the condition of high temperature; the Stainless steel inter layer interface added with cooling fluid can carry on reaction under the condition of low-temperature.
4. It can be added with tap water to quickly take away reaction heat.
5. Digital mixing motor, electron speed regulator control, matched with a torque increasing of reducer.
6. Reasonable structure and selected materials. The mechanical components use stainless steel.
Ⅱ. Main technical parameters
◎Product model: 50L
◎Reaction Stainless steel vessel capacity:50L
◎Reactor cover opening: eight-opening
◎Reactor cover opening design: Ø38 feeding port; ; Ø 51 evaporative reflux port; G1” Vent port; Ø 80 Sight glass; M27*2 temperature measurement port; M20*1.5 Vacuum port; Ø 80 solid feed inlet（Quick-open）; DN 80 stirring port.
◎Stirring speed: 5～600rpm
◎Operating pressure:(MAX) -0.096MPa
◎Power of engine:370W
WRITE A MESSAGE TO US
The company has a high-quality R & D team with rich experience in the design and development of reactor, high and low temperature temperature temperature control system and ultrasonic equipment.